ALL OIL-FREE AIR COMPRESSOR KT-KY-1500/9000W

Product Introduction

KT-KY series oi.-free air compressor adopts high quality, large flow, oil-free rocking piston compressor as the power source which can provide a stable oil free source, avoid oil pollution into the human body, and avoid the terminal machine cost resistant tubing, caused by oil failure; lts components are selected high-quality components, the machine according to the characteristics of the oxygen generator manufacturing, large flow, low noise, clean and dry air source, smooth operation, automatic control, in the process of operation, when the pressure in the tank reaches the minimum or maximum value, the compressor will automatically start up or stop; This machine is especially suitable for oxygen generator and air type ozone system air source, is an ideal choice for small and medium enterprises.

Product Features

(1) The applicable pressure range is wide. The piston compressor can be designed as low pressure, medium pressure and high pressure, and at the same speed, when the exhaust pressure fluctuates, the displacement of the piston compressor basically remains unchanged;

(2) Delixi pressure protection switch, can be set to stop by pressure, and can be adjusted by differential pressure when restarting;

(3) The output gas is oil-free, clean and dry, and the subsequent gas source treatment does not require degreasing, which is suitable for many places;

(4)Low noise, the noise is only half of the traditional piston machine;

(5) The stainless steel gas storage tank is equipped with a pressure relief valve. After reaching a certain pressure, the pressure relief valve will automatically open, which is safe and reliable,

(6) The automatic drainage function of the automatic drainage solenoid valve makes the water content of the air source lower,

(7) independent research and development of high-performance circuit modules, with the characteristics of stability, high efficiency and energy saving;

(8) Air cooling is forced to dissipate heat, and the cylinder block of each machine head is equipped with fan cooling, so as to ensure that the machine can run continuously;